DPE & Rénovation

Two different DPE for the same property: which one counts?

A 2019 DPE rated E, a 2026 DPE rated F, same property. The law does not pick the most recent: it discards expired assessments, then attaches legal effects to the document actually handed over.

Co-founder of OneDpe
Last updated 14 min read
Two different DPE for the same property: which one counts?

You are selling your flat. Your file contains two energy assessments: the one you commissioned in 2022 when you bought, showing class E, and the one the agency has just ordered, which comes out at F. Same property, same walls, two labels. The buyer asks which one is correct — and the answer decides the price.

The situation has become commonplace. ADEME's DPE-Audit Observatory listed 15,292,277 assessments for existing homes on 29 July 2026, and three recent changes have multiplied duplicates: the complete overhaul of the calculation method in 2021, the reduction of the electricity conversion factor on 1 January 2026, and the free updated-label certificate issued by ADEME. Many owners now hold two documents that do not say the same thing.

Only one DPE is binding: the one you hand over. It is not automatically the most recent, nor the most favourable — it is the one appended to the technical diagnostic file or attached to the tenancy agreement, provided it is still valid.


What this article covers

This article explains why two DPE (Diagnostic de Performance Énergétique — the French Energy Performance Certificate) can coexist for the same property, how to determine which one is legally binding, and what you risk by appending the wrong one. It covers the five causes of duplication, the validity rule that eliminates part of the documents outright, and the method for settling the question in minutes from the ADEME reference number.


Why two DPE coexist for the same property

Coexistence is not an anomaly. Nothing prohibits commissioning several assessments: the DPE is a service, and an owner may order as many as they wish. Five situations commonly produce duplicates.

1. An old assessment and a recent one

This is the most frequent case. You had a DPE from your purchase, and the agency or the notary orders a new one for the sale. Both documents exist, both carry your address, and they may differ by one or two classes — not least because the calculation method was completely overhauled by the order of 31 March 2021.

2. The updated-label certificate

Since 1 January 2026, the conversion factor from final to primary energy for electricity has fallen from 2.3 to 1.9 (order of 13 August 2025, published in the Official Journal of 26 August 2025). For eligible properties, ADEME issues a free certificate showing the new label.

Key takeaway: this certificate is not a second DPE. It is the same assessment, with the same consumption figures, to which the conversion factor in force is applied. It accompanies the original DPE, does not replace it, and does not restart its period of validity. Where it exists, however, it is the label it carries that counts, not the one printed on the original assessment: that is the point of our article on the updated-label certificate.

⚠️ Warning: a fourth wave of duplicates is coming. The order of 19 August 2026, published in the Official Journal of 26 August 2026, lowers the electricity conversion factor from 1.9 to 1.7 for DPE issued from 1 January 2027. A DPE issued in December 2026 and one issued in January 2027 on the same property may show two different classes without either being wrong.

3. A building-level DPE and an individual one

In a block of flats, a building-wide DPE may coexist with the assessment for your own unit. An individual assessment generated from the collective one and an assessment carried out on site do not always give the same result: the first distributes averages, the second measures your home.

4. A cancelled assessment, then reissued

An assessor who finds an error — a mismeasured floor area, a misidentified heating system — cancels the assessment and files a new one. Both reference numbers existed, but only one remains active in the database.

5. A second opinion commissioned by the buyer

A buyer or tenant who doubts the result commissions their own assessment. Two valid documents then stand face to face, with two different authors.


What the law says: validity first, then enforceability

Two successive rules settle the question. The first eliminates expired documents, the second designates the one that binds.

Validity: ten years, but not for everyone

A DPE is valid for ten years (French Construction and Housing Code (CCH), article D. 126-19). This rule has a decisive transitional exception, set out in decree no. 2020-1610 of 17 December 2020, which shortened the validity of assessments issued under the former method.

Date the DPE was issuedLast day of validityStatus on 12 November 2026
Before 1 January 201831 December 2022Expired
1 January 2018 to 30 June 202131 December 2024Expired
From 1 July 2021Ten years after issueValid

⚠️ Warning: as of November 2026, no DPE issued before 1 July 2021 is still valid. If one of your two documents predates that date, the debate is over: it proves nothing, whatever class it shows. Many disputes end there.

Enforceability: the document handed over is the one that binds

Since 1 July 2021, the DPE is no longer a mere information document: it is legally binding. Its contents commit whoever hands it over, with the exception of the recommended works, which remain indicative.

For a sale, the DPE forms part of the technical diagnostic file appended to the preliminary contract or the deed (CCH, article L. 271-4). For a letting, it is given to the tenant when the tenancy agreement is signed (CCH, article L. 126-29). In both cases, it is the document actually appended that produces legal effects — not the one sitting in a drawer, however recent.

This rule has a direct consequence: where two valid DPE coexist, the choice of which to append belongs, in practice, to the seller or landlord. But that choice is not risk-free.


Which one to choose, and what getting it wrong costs

The practical rule in three questions

To settle between two documents, ask these in order.

What to check on both DPE: 1) Was it issued after 1 July 2021? If not, the document is eliminated. 2) Is the 13-character reference number still active in the ADEME database? An assessment cancelled by its author no longer appears there. 3) Of the remaining documents, which describes the property in its current state — before or after works?

In the vast majority of cases, these three questions leave only one document standing. Where two remain, the more recent assessment in principle describes the state closest to reality: that is the one to append, even if it is less favourable.

The risk: loss of the chance to negotiate

Appending the more advantageous document while knowing that a later assessment contradicts it is not a consequence-free trick. The French Supreme Court has held that a buyer misled about energy performance suffers a recoverable loss, characterised as the loss of a chance to buy at a lower price (Cass. 3rd civil chamber, 21 November 2019, no. 18-23.251). In an unreported ruling of 17 October 2024 (no. 22-22.882), it left standing the assessment of the Pau Court of Appeal, which had retained 50% of the loss claimed.

⚠️ Warning: both rulings concern sales from 2009 and 2015, under the earlier text that gave the DPE merely informative value. Their transposition to assessments issued since 1 July 2021 has not been settled, and no Supreme Court decision on a sale after that date could be identified. The 50% figure belongs to one case, not to a rule: be wary of any site presenting it as a scale. See our article on the legal consequences of the binding DPE.

In other words: the gain expected from appending the more flattering class is an exposed gain, and it stays exposed after the sale, once the price has been banked and the property is gone.

Worked example: a two-bedroom flat in Nantes

Profile: 68 sq m flat in Nantes, listed at €265,000. The seller holds a DPE from March 2022 rated E and a DPE from September 2026 rated F, issued after the boiler was replaced with a model less efficient than expected.

Both assessments are valid: both postdate 1 July 2021 and are less than ten years old. The seller is therefore free, in practice, to append the 2022 one. Taking a market discount of 6% between E and F — a working assumption, the real gap depending on the area and the property — the immediate stake is roughly €15,900.

Price advertised with the 2022 DPE (class E)€265,000
Price negotiated if the 2026 DPE (class F) is appended€249,100
Apparent gain for the seller€15,900
If a court retained the same rate as in Pau, i.e. 50%€7,950
Remaining gain, before legal costs and before any risk to the sale€7,950

This table is an illustration, not a forecast: no scale fixes the award, and the 50% rate comes from a single appeal decision on a 2015 sale. It also ignores legal costs, time spent and litigation risk. What it shows is that a substantial share of the expected gain stays exposed, to a risk that outlives completion.


Common mistakes

Assuming the most recent automatically cancels the older one

A new DPE does not delete the previous one: both remain in the ADEME database for as long as they are valid, with their respective reference numbers. Only cancellation by the assessor removes an assessment from the database.

Confusing the ADEME certificate with a new assessment

The updated-label certificate does not extend the validity of the original DPE and does not constitute a second assessment. A 2022 DPE accompanied by its 2026 certificate remains a 2022 DPE, valid until 2032.

Appending an expired DPE without noticing

This is the costliest mistake, and the easiest to avoid: a 2019 DPE looks recent, but it expired on 31 December 2024. The seller believes they are compliant and are not.

Forgetting that the buyer can check in two minutes

The DPE-Audit Observatory database is public. Any buyer can enter the 13-character reference number and see the date, the class and the status of the assessment — and notice that another document exists at the same address.


Check which of your two DPE stands up

OneDpe DPE verification

From the 13-character reference number, the tool reloads the data filed with ADEME, recalculates the label using the 3CL methodology in force — the official conventional calculation method for the DPE —, and flags inconsistencies between what is declared and what is calculated: floor area, heating system, insulation, hot water production. Run it on both assessments: if one of them rests on an aberrant input, you will see it immediately.

Further reading: where to find the ADEME number on your DPE.


Conclusion

Two DPE for the same property is not an anomaly, and the law does not mechanically crown a winner. It proceeds in two stages: it first discards any expired assessment — which, in November 2026, eliminates everything issued before 1 July 2021 — then attaches legal effects to the document actually handed over. The seller's or landlord's choice is therefore real, but it is supervised: preferring the more flattering class in full knowledge exposes you to a claim for loss of chance, the amount of which no text fixes.

The useful reflex fits in one line: before appending anything, run both reference numbers through OneDpe DPE verification and see which one survives recalculation. It is free, and it is exactly what the other side will do.

FAQ

Append the more recent assessment. Both being valid, the law leaves you the practical choice of which document to attach to the technical diagnostic file, but the more recent one describes the state closest to the property's reality. Knowingly appending the older one because it is more favourable exposes you to a claim for loss of the chance to negotiate the price, an amount the court sets case by case.

No. Assessments issued between 1 January 2018 and 30 June 2021 ceased to be valid on 31 December 2024, and those predating 2018 on 1 January 2023, under decree no. 2020-1610 of 17 December 2020. As of November 2026, only DPE issued from 1 July 2021 onwards remain valid, for ten years from their date of issue.

No. The updated-label certificate applies to the existing assessment the electricity conversion factor that came into force on 1 January 2026, down from 2.3 to 1.9. It accompanies the original DPE without replacing it, without changing its consumption figures and without extending its validity: a 2022 DPE certified in 2026 remains a 2022 DPE, valid until 2032. It is, however, the label on the certificate that counts as the property's class.

Yes, nothing prohibits it: the DPE is a service and you may commission as many as you wish. But successive assessments all remain visible in the public database of ADEME's DPE-Audit Observatory. Repeating attempts until you obtain the desired class is therefore both visible to the buyer and legally risky.

By entering its 13-character reference number in the database of ADEME's DPE-Audit Observatory. An assessment cancelled by its author no longer appears there: if the number on your document returns no result while the address shows a different one, the first has been withdrawn and replaced. The paper document you hold then has no value.
#EPC#Thermal sieve#Property sale
About the author

Steven Annonziata

An entrepreneur and real-estate investor, Steven Annonziata is an engineering graduate of CentraleSupélec, holds an MSc in Space Technology from University College London (UCL) and, more recently, a Bachelor’s degree “Responsable d’Affaires Immobilières”. Passionate about real estate, Steven co-founded OneDpe to give professionals and investors all the data they need for their projects.

Newsletter

Get our best tips delivered weekly

Free DPE tools

Analyze your DPE

Check a diagnosis reliability, simulate the energy label and estimate the resale discount in minutes.

Related articles

View all